GLCD connected to Atari XE - the first project with VIAtari

Moderator: bbiernat

Post Reply
User avatar
pancio
Administrator
Posts: 67
Joined: 18 September 2013, 23:02 - Wed
Location: SILESIA

GLCD connected to Atari XE - the first project with VIAtari

Post by pancio »

Done!

The first project which is using VIAtari was made...
I'm glad to present the first GLCD 162x64 connected to Atari:
Blank screen S1D15705 connected to Atari
Blank screen S1D15705 connected to Atari
Blank screen S1D15705 connected to Atari
Blank screen S1D15705 connected to Atari
In order to connect GLCD I used both parallel ports - PORTB is a data bus and PORTA is for control signals. Actually I used only 5 signals, so rest may be use for other stuff.
PCB of S1D15705
PCB of S1D15705
Detail regarding wiring you may find in attached software.
In this point I need to say thanks to @mono user from http://atari.org.pl which wrote very good PLOT procedure (topic: http://www.atari.org.pl/forum/viewtopic.php?id=16152).

Okay, showtime :-)

First test:
https://www.youtube.com/watch?v=AIqA3mwTjPE

Second test:
https://www.youtube.com/watch?v=UfRcnNq25qg

Pseudo"white noise" and fill test:
https://www.youtube.com/watch?v=Y7OI5nXIfd0

Plot test: (point by point into memory)
https://www.youtube.com/watch?v=A8FGVxnLplQ

The last 2 tests are making into Atari memory and result is sending as whole frame to CLCD. If you are interested in how it's work, please analyse software...
Attachments
VIAlib111_cut.zip
Source code.
(17.89 KiB) Downloaded 1946 times
VIAxe.zip
KiCAD files with GERBERs
(345.84 KiB) Downloaded 1955 times
S1D15705 connected by VIAtari
S1D15705 connected by VIAtari

Post Reply